华为设备常用查询命令，有用得着的收藏下

root 默认登陆用户名

root default login username

admin 默认登陆密码

Default landing password for admin

MA5680T> enable 进入特权模式

MA5680T> enable into privilege mode

MA5680T # config 进入终端配置

MA5680T #config into terminal configuration

MA5680T (config)# switch language-mode 中英文切换

MA5680T (config)#switch language-mode

MA5680T (config)#display board 0 查看所有的单板 0 是框号

MA5680T (config) #displayboard0

MA5680T (config)# interface gpon 0/1 进入GPON命令模式 1是PON口号

MA5680T (config)# interface gpon 0/1 entering GMON command mode 1 is PON slogan

MA5680T(config-if-gpon-0/1)# port 0 ont-auto-find enable 0 是 端口号

MA5680T (config-if-gpon-0/1) #port 0 ont-auto-find environment 0 is port number

MA5680T(config-if-gpon-0/1)#quit

MA5680T (config)#display ont autofind all 查看自动发现的ONU（如果存在自动发现的ONU则如下所示）

MA5680T (config)#displayOnt autofind all view automatically discovered ONU (if there is an automatically discovered ONU, as shown below)

---------------------------------------------------------------------

序列号 : 1

Serial number: 1

框/槽/端口 : 0/1/0

Box/ slot/ port: 0/1/0

ONT SN : 4857544350F5FB0A

密码 : 0x30303030303030303030(0000000000)

Password: 0x303030303030303030303030(000000000)

逻辑标识 :

Logical identification:

校验码 :

Verify code:

生产厂商ID : HWTC

Producer ID: HWTC

ONT版本 : MA5626 VER.D

ONT version: MA5626 VER.D

ONT软件版本 : V8R308 C00

ONT version: V8R308 C00

ONT设备ID : SmartAX MA5626

ONT device ID: SmartAX MA5626

ONT自动发现时间 : 2012-03-19 15:37:40+08:00 ---------------------------------------------------------------------

Time of automatic discovery of ONT 2012-03-19 15:37:40+08:00 - -----------------------------------------------------------------------

GPON自动发现ONT个数为 1

GPON automatically found that the number of ONTs was 1

进入config终端配置　下查看命令

Enter Config Terminal Configuration View Commands

1、通过端口查看ONU的mac-address

1, views ONUB's mac-address at port

MA5680T (config)# display mac-address port 0/1/0 （0/1/0是框号/槽号/端口号）

MA5680T(config)#display Mac-address port 0/1/0 (0/1/0 is the box/channel/port number)

2、通过VLAN查看ONU的mac-address

2, views ONUB's mac-address

MA5680T (config)# display mac-address vlan 100 （ 100是VLAN id）

MA5680T(config)#display Mac-address vlan 100 (100 is VLAN id)

3、查看ONU的service-port 信息

3, views ONUB's service-port information

MA5680T(config)#display service-port port 0/1/0 ont 1 （0/1/0是框号/槽号/端口号 1是ONU id）

MA5680T(config)#displayservation-port 0/1/0 ont 1 (0/1/0 box/ chute/port number 1 ONU id)

4、查看MA5680T的版本信息

See version MA5680T at . ]

MA5680T(config)# display version

5、查看DBA 模板

5, view the DBA template

MA5680T(config)# display dba-profile all

6、查看线路模板

6, view line template

MA5680T(config)#display ont-lineprofile gpon all

7、查看单板信息

7, and look for single-board information

MA5680T(config)# display board 0

8、查看单板上ONU的信息

8; see single-board information about ONUB

MA5680T(config)# display board 0/1 (0/1是框号/槽号)

MA5680T(config)#displayboard 0/1 (0/1 box/slut)

进入GPON命令模式 查看命令

Enter GMON command mode View command

1、查看ONU收光功率

1, see ONUB light power

MA5680T(config-if-gpon-0/1)#display ont optical-info 0 1 （0是端口号 1是ONU id 号）

MA5680T(config-if-gpon-0/1)#displayOnt OPtical-info 01 (0 is port number 1 is ONUB id)

2、查看ONU的信息和状态

2, views ONUB information and status

MA5680T(config-if-gpon-0/1)#display ont info 0 1 （ 0是端口号,1是ONU id 号）

MA5680T(config-if-gpon-0/1)#displayOntinfo 01 (0 is port number, 1 is ONUB id)

　　　　　　　　　　　　 Display ont state 0

3、查看PON板的端口信息

3, view port information on PON board

MA5680T(config-if-gpon-0/1)#display port info 0 （0是端口号

MA5680T(config-if-gpon-0/1)#displayportinfo0 (0 is port number )

4、查看PON板的端口状态

4, view port status on PON board

MA5680T(config-if-gpon-0/1)#display port state 0 （0是端口号

MA5680T(config-if-gpon-0/1)#displayport state 0 (0 is port number )

5、查看ONU的注册信息

5; see ONUB registration

MA5680T(config-if-gpon-0/1)#display ont register-info 0 1 （ 0是端口号 1是ONU id 号）

MA5680T(config-if-gpon-0/1)#displayontregister-info 01 (0 is port number 1 is ONUB id)

---------------------------------------------------------------------

索引编号 : 1

Index number: 1

认证方式 : SN认证

Authentication method: SN authentication

ONT序列号 : 485754436E3EDB04

ONT serial number: 48575436E3EDB04

密 码 :

Code:

ONT类型 : SmartAX MA5620

ONT type: SmartAX MA5620

上线时间 : 2012-02-10 09:25:58

Time online: 2012-02-10 09:25:58

下线时间 : 2012-03-07 06:15:55

Time offline: 2012-03-07 06:15:55

下线原因 : ONT掉电

Underline cause: ONT powered out

-----------------------------------------------------------------

查看ONU版本信息

View ONU version information

5680T(config-if-gpon-0/1)#display ont version 0 1 （ 0是端口号 1是ONU id 号）

5680T (Config-if-gpon-0/1)#display ont vension 01 (0 is port number 1 is ONUB id)

--------------------------------------------------

框/槽/端口 : 0/1/0

Box/ slot/ port: 0/1/0

ONT编号 : 1

ONT number: 1

厂商编号 : HWTC

Vendor number: HWTC

ONT版本 : MA5620 VER.B

ONT version: MA5620 VER.B

产品编号 : 111

Product number: 111

设备编号 : SmartAX MA5620

Device number: SmartAX MA5620

主用软件版本 : V8R308 C00

Master software version: V8R308 C00

备用软件版本 :

Backup software version:

-------------------------------------------------

display board 0 查看所有单板的状态信息

Display board 0 View status information for all singleboards

display board 0/1 查看第一块单板的详细信息

Display board 0/1 to see details of the first sheet

display version 查看设备基本信息（设备运行时间）

DisplayVersion View Device Basic Information (Funtime of Devices)

display language 查看设备的版本

Display device viewing version of device

display patch all 查看设备的补丁状态

Display patch all view the patch state of the device

display mac-address all 查看设备下所有的mac地址

Display Mac-address all

display mac-address board 0/1 查看第一块单板下的mac地址

Display Mac-address board 0/1

display mac-address port 0/1/0 查看此端口下的mac地址

Display Mac-address port 0/1/0

display pstn state 0/2 查看第二块单板的语音用户状态

Display pstn state 0/2 view the voice user status of the second single plate

display if-h248 all 查看h248端口状态

Display if-h248 all check H248 port status

display if-h248 attribute all 查看h248接口属性信息

Display if-h248 attribute all for h248 interface properties

常用信息采集命令

Common information gathering command

语音模式切换成中文 (config)#switch language-mode

Voice mode switch to Chinese (config)#switch language-mode

查看单板运行状态 (config)#display board 0

View tablet active (config)#display board0

查看设备主机版本和补丁 (config)#display language

View host version and patches (config)

(config)#display patch all

查看单板版本 (config)#display version 0/1（槽位号）

View singleboard version (config)#displayVersion 0/1

查看历史告警 (config)#display alarm history all

View History Alert (Config)#displayarmHitory all

查看历史事件告警 (config)#display event history all

View historical events alert (config)#displayevent History all

查看H248接口状态 (config)#display if-h248 all

View H248 interface status (config)#display if-h248 all

查看操作日志 (config)#display log all

View Operations Log (config)#display log all

常用操作命令

Common Operations Commands

重启单板 (config)#board reset 0/3 （槽位号）

Restart singleboard (config)#board reset 0.3 (hull bit)

重启设备 (config)#reboot system

Restart device (config)#reboot system

查看用户PC机的MAC地址

View the MAC address of the PC machine

PC机上选择开始－－运行－－输入cmd进入dos界面

Select on PC to start -- run -- enter cmd into dos interface

输入ipconfig /all

Enter ipconfig/all

en2. con3. sw l 中文4. display ont autofind all 自动发现光猫5. interface gpon 0/1 进入第1块pon板6. ont add 1 sn-auth 485754430DA7EF0C omci ont-lineprofile-id 20 ont-srvprofile-id 20####ont add 1（变，端口号） sn-auth 485754436AC3911B（变，序列号） omci ont-lineprofile-id 20（线路模板） ont-srvprofile-id 20（业务模板）######端口号 :1, ONT号 :07.ont port native-vlan 1 0 eth 1 vlan 100 更改1口默认vlan####ont port native-vlan 1(变，端口号） 0（变,ont号） eth 1 vlan 1008. ont port native-vlan 1 0 eth 1 vlan 100 更改2口默认vlan####ont port native-vlan 1(变，端口号） 0（变,ont号） eth 2 vlan 1009. quit 退出pon板10. service-port vlan 100 gpon 0/1/1 ont 0 gemport 0 multi-service user-vlan 100 下发vlan到 光猫####service-port vlan 100（外vlan) gpon 0/1/1(变，0/曹号/端口号） ont 0 （变，ont号）gemport 0（模板的限速编号，绑定定内vlan) multi-service user-vlan 100(内vlan)11. save 保存display board 0/1 查看pon板ont信息删除光猫1. undo service-port vlan 100 gpon 0/1/1 ont 0 gemport 0 删除 vlan 2. interface gpon 0/1 进入pon板 3. ont delete 5 0

En2. con3. sw l Chinese 4. display ont autofind all devices 5. interface gpon 0/1 enter pon board 6.ont add 1 sn-auth 48575430 DA7EF0C omci ont-lineprofile-id 20 ont-srvprofile-id 20##vvvveved 1 (changed port) sn-auth 457436AC3911B (sequent number 0), omci ont-line project 20 (line template) ###vátlán #nvet1 #nvet1, nglbn2 #nvet1 #nvvet1, ngvvet1 #nbn1 #nbn tl tl tl bn bt

A

AC Alternating Current 交流（电）

ACAlternating Current Exchange (electricity)

ADSL2+ Asymmetric Digital Subscriber Line 2plus 不对称数字用户线

ADSL2+ Asymmetric Digital Subscriber Line 2plus Asymmetric User Line

D

DC Direct Current 直流（电）

DC direct Current Direct (electric)

DDF Digital Distribution Frame 数字配线架

DDFDigitalDistrificationFramework

E

ESC Environment & Power Monitoring Board 环境和电源监控板

ESCEnvironment & Power Monitoring Board Environment and Power Monitoring Board

F

FC Ferrule Connector 金属箍连接器

FCFerrule Contractor Metal Connector

FE Fast Ethernet 快速以太网

FEFast Ethernet Fast Ethernet

FPGA Field Programmable Gate Array 现场可编程门阵列

FPGAField Programable Gate Array Field Programable Door Array Array

G

GE Gigabit Ethernet 千兆以太网

GEGigabit Ethernet gigabyte

GND Ground 接地，地

GN Ground,

GPON Gigabit Passive Optical Network G 比特无源光网络

GPONGigabit Passive OceanNetwork Gbit Sourceless Light Network

I

IP Internet Protocol 互联网协议、网际协

IP Internet Protocol, Internet Association

议

Session

ISDN Integrated Services Digital Network 综合业务数字网

ISDNIntegrated Services Digital Network

L

LC Lucent Connector LC 型连接器

LCLucent Contractor LC connector

M

MDF Main Distribution Frame 主配线架

MDFMain Distribition Frame

MII Media Independent Interface 媒介无关接口

MIIMediaIndependent Interface media unrelated interface

O

ODF Optical Distribution Frame 光纤配线架

ODFOptic Distortion Frame Fibre Rendering

OLT Optical Line Terminal 光线路终端

OLTOptical Line Terminal Light Terminal

ONT Optical Network Terminal 光纤网络终端

ontOpticalNetwork Terminal Fibre Network Terminal

ONU Optical Network Unit 光网络单元

ONUOpticalNetwork Unit Light Network Unit

P

PC Physical Connect 球面连接器

PCPhysical Connect face connector

PDU Power Distribution Unit 直流配电框

PDUPower Distribution Unit direct flow distribution box

PGND Protection Ground 保护地

PGNDProtection Ground

PHY Physical Sublayer & Physical Layer 物理子层&物理层

PHY Physical Sublayer & Physical Layer & Physics Layer

PON Passive Optical Network 无源光网络

PONPassive OpenNetwork Unsourced Light Network

POTS Plain Old Telephone Service 普通电话业务

POTSPlain Old Telephone Service General Telephone Service

PSTN Public Switched Telephone Network 公用交换电话网

PSTNPublic Switched Telephone Network

S

SC Square Connector 方形连接器

SCSquare Contractor square connector

SCU Service Control Unit 业务控制单元

SCUService Control Unit Operations Control Module

STP Shielded Twisted Pair 屏蔽双绞线

STPShielded Twisted Pair Blocked Double Curves

T

TDM Time Division Multiplexing 时分复用

time Division Multiplexing

U

UTOPIA Universal Test & Operations PHY Interface for

ATM

ATM 的通用测试和

Generic tests and ATMs

操作物理接口

Operation Physics Interface

UTP Unshielded Twisted Pair 非屏蔽双绞线

UPPUnshielded Twisted Pair does not shield double strangulation

V

VDSL Very High Speed Digital Subscriber Line 超高速数字用户线路

VDSLVery High Speed Digital Subscriber Line

常用检测查询命令：

common detection query command:

1进入config终端配置

1 into Config terminal configuration

2查看设备单板状态：

2 Look at device tablet status:

Huawei (config)#display board 0

3查看设备端口状态：

3 View device port state:

Huawei (config)#display board 0/1

4查看全局配置命令：

4 views global configuration command:

Huawei (config)#display current-configuration

5查看设备所有告警

5 views all alerts

Huawei (config)# display alarm active all

6查看上行板光衰

6 views the upper board light failure

Huawei (config)#interface giu 0/17

Huawei (config-if-giu-0/17)#display port ddm-info 0

7查看上行光模块信息

7 views uplink module information

Huawei (config)#interface giu 0/17

Huawei (config-if-giu-0/17)# display port opticstate 0

8查看ONU的service-port 信息

8 views ONUB's service-port information

Huawei (config)#display service-port port 0/1/0 ont 1（0/1/0是框号/槽号/端口号 1是ONU id）

Huawei (config)#display service-port 0/1/0 ont 1 (0/1/0 box/ chute/ port number 1 ONU id)

9查看用户mac地址上报情况.

9 to check the user's Mac address.

Huawei (config)#display mac-address all

10查看vlan XXX下学习到的地址信息,断定ONU用户故障，一般用此法：

10 views the information on the address learned under vlan XXX and determines that the ONU user is malfunctioning, generally using this method:

Huawei (config)#display mac-address vlan XXX

11查询端口下MAC地址学习情况,需要知道用户所在ONU具体注册的PON口信息.

11 query learning on the MAC address at the port, requiring information on the PON portal specifically registered by the user at ONUB.

Huawei (config)#display mac-address port 0/1/0 （0/1/0是框号/槽号/端口号）

Huawei (config)#display Mac-address port 0/1/0 (0/1/0 is the box/slut/port number)

12查看DBA 模板

12 views the DBA template

Huawei (config)# display dba-profile all

13查看线路模板

13 views the line template

Huawei (config)#display ont-lineprofile gpon all

14查看单板上ONU的信息

14 See information about ONUB on single-board

Huawei (config)#display board 0/1 (0/1是框号/槽号)

Huawai(config)#display board 0/1 (0/1 box/slut)

15查看整个单板的MAC

15 See MAC on the whole table.

Huawei (config)#display mac-address board 0/1 (0/1是框号/槽号)

Huawai(config)#display Mac-address board 0/1 (0/1 box/slut)

16显示上行口实时流量

16 shows upbound real-time traffic

Huawei(config-if-giu-0/18)#diisplay port traffic 0

17显示VLAN列表

17 shows the VLAN list

Huawei(config)#display vlan all

18查看配置中所有的vlan配置细节：

18 View allvlan configuration details in configuration:

Huawei (config)#display current-configuration section vlan

19自动发现新上报的ONU：

19 automatically discovers newly reported ONU:

Huawei (config)#display ont autofind all

20查看snmp配置

20 views snmp configuration

Huawei (config)# display current-configuration section public

21查看vlan配置

21 Viewvlan configuration

Huawei (config)# display current-configuration section vlan

22查看所有epon单板下配置

22 views all the configurations under the pon tablet

Huawei (config)# display current-configuration section epon

23查看模块epon单板下的配置

23 views configurations under the module pon tablet

Huawei (config)# display current-configuration section epon-0/1

24查看service-port配置

24 views the service-port configuration

Huawei (config)#display current-configuration section bbs

25查看service-port状态

25 views the service-port state

Huawei (config)# display service-port all

26查看系统模板配置信息

26 View System Template Configuration Information

Huawei (config)# display current-configuration section global　　　Global 全局的

Huawei(config)# display current-configuration section global global

27查看告警历史（所有）

27 See alarm history (all)

Huawei (config)#display alarm history all

ONU与OLT间光通路的光衰减必须在15dB--25dB之间

2进入EPON/GPON命令模式

2 into EPON/GPON command mode

1查看ONU收光功率

1 views ONUB light power

Huawei(config-if-epon-0/1)#display ont optical-info 0 1 （0是端口号 1是ONU id 号）

Huawai (Config-if-epon-0/1) display ont optical-info 01 (0 is port number 1 is ONUB id)

2查看ONU的状态

2 views ONUB's status

Huawei (config-if-epon-0/1)#display ont info 0 2 EPON，0号端口号，2号ONT id 号

Huawi (config-if-epon-0/1)/strong>display ont info 02 EPON, port number 0, number 2 ONT id

Huawei (config-if-gpon-0/1)#display ont info 0 2 GPON，0号端口号，2号ONT id 号

Huawai (config-if-gpon-0/1)/strong>display ont info 02 GPON, port number 0, number 2 ONT id

3查看PON板的端口信息

3 views port information on PON board

Huawei(config-if-epon-0/1)#display port info 0 （0是端口号）

Huawai (config-if-epon-0/1)/strong>display port 0 (0 is port number)

4查看PON板的端口状态

4 views port status on PON board

Huawei(config-if-epon-0/1)#display port state 0 （0是端口号）

Huawai (config-if-epon-0/1)/strong>displayport status 0 (0 is port number)

5查看ONU的注册信息

5 views ONUB's registration

Huawei(config-if-epon-0/1)#display ont register-info 0 1 （ 0是端口号 1是ONU id 号）

Huawai (Config-if-epon-0/1) display ont register-info 01 (0 is port number 1 is ONUB id)

6查看ONU版本信息

6 views ONUB version information

Huawei(config-if-epon-0/1)#display ont version 0 1 （ 0是端口号 1是ONU id 号）

Huawai (Config-if-epon-0/1)/strong>display ontot version 01 (0 is port number 1 is ONUB id)

7显示ONT ETH口实时流量

7 shows real-time traffic at the ONT ETH

Huawei(config-if-epon-0/1)#display ont port state 0 0 eth-port all

8重启ONT

8 Reboot ONT

Huawei(config-if-epon-0/1)#ont reset 0 3 //PON口号/ONT id

Huawai (Config-if-epon-0/1)/strong>ont reset 0/3/PON slogan/ONT id

9重新注册ONT

9 Re-registered ONT

Huawei(config-if-epon-0/1)#ont re-register 0 3 //PON口号/ONT id

Huawai (Config-if-epon-0/1)/strong>ont re-register 03//PON slogan/ONT id

10显示 PON口0端口下所有ONT的信息

10 shows all of the information on the ONT at PON port 0

Huawei(config-if-epon-0/1)#display ont info 0 all看在什么模式下，config下查询的是框号，gpon下查询的是端口号

Huawai (config-if-epon-0/1) display ontinfo 0 >all looking in the mode, box number under config, port number under gpon

11显示PON口实时流量

11 shows real-time PON traffic

Huawei(config-if-epon-0/1)#display port traffic 0

Huawei(config-if-gpon-0/1)#display port traffic 0

3 其他命令

3 Other Commands

1查询ONT的相关信息

1 for information on ONT

Huawei (config)#display ont info all 　　这里查询所有的ONT　info 和all 之间需要有数字

Huawei(config)/strong>display ontinfo all query all ONTinfo and all

看在什么模式下，config下查询的是框号，gpon下查询的是端口号

Depending on the pattern, the search under config is for a box number, and the query under gpon is for a port number.

2查看活动用户MAC

2 views campaign user MAC

Huawei (config)#display mac-address all

5复位单板

5 resets

Huawei (config)#board reset 请慎重使用此命令，影响业务,复位主控板或系统，执行reboot命令

Please use this command carefully to influence the operation, reset the control panel or system, and execute the reboot command.

6删除0/3槽位上的业务单板

6 Delete the business sheet from the zero/3 slot

Huawei (config)#board delete 0/3

7删除物理号

7 Delete Physics

Huawei (config)#mgpstnuser batdel 0/2/0 0/2/63 ！在（esl user）模式中！

Huawi (config)/strong>mgpstnuuser batdel 0/2/0/2/63! In the (esl user) mode!

8 VLAN删除

8 VLAN delete

先删

delete

Huawei (config)#undo service-port

再删

delete

Huawei (config)#port vlan

最后删VLAN

delete VLAN

Huawei (config)#vlan

复位MG端口

Repeated MG Port

Huawei (config)#reset

全删除

Delete all

Huawei (config)#erase flash data

确认0框所有单板

confirms all cells in box 0

Huawei (config)#board confirm 0

删除

Delete

Huawei (config)#ONT ont delete

查看10槽位EPON板配置

views the 10 slot EPON board configuration

Huawei (config)#display current-configuration section epon-0/10

查询ONT的IP地址的相关配置

Huawei (config)# display ont ipconfig

删除ONU全部配置

Remove all configurations of ONUB

Huawei (config)#erase flash data

删除流量模板

Remove flow template

Huawei (config)#undo traffic table ip